RAM Mounts from e-mount - View Selected Products

.
(1) NHD/RAM Vehicle Base-GM 1500,2500,3500 - Seat Frame w/Step		#RAM-VB-102

	No-Holes pedestal base custom designed for use in the following trucks: CHEVROLET 2500 C/K (2000-2006) CHEVROLET 3500 C/K (2000-2006) CHEVROLET SILVERADO (1999-2006) CHEVROLET SUBURBAN (2000-2006) CHEVROLET TAHOE (2000-2006) GMC SIERRA (2000-2006) GMC YUKON (2000-2006) Base attaches to vehicle using the passenger side seat cushion frame bolts. Constructed from 8 gauge steel. Base provides 5 inch projection and 5.12 inch elevation for attaching a pole base.
	Price . . . .$ 89.54
	Item # 90-10-906-001
.
(2) NHD/RAM Vehicle Base-GM-CAPRICE POLICE PATROL VEHICLE- Seat Frame		#RAM-VB-189

	Compatible Vehicles: Chevrolet Caprice Police Patrol Vehicle (2012) Chevrolet Caprice Police Patrol Vehicle (2011) Placement of Mount: Passenger side on the floor, in front of seat Drilling Requirements: No - uses existing seat leg clips. For added support base can also be drilled to floor board. Seat Configuration: Bucket Pole: Purchased Separately Material:Powder Coated Steel Note: Installs in minutes with no drilling required. Low profile minimized intrusion into passenger leg space. Rock solid construction. Lifetime warranty! Dimensions: A = 18.87", B = 10”, C = 4”, Track Hole Center = 16.25”
	Price . . . .$ 86.97
	Item # 90-10-906-001A
.
(3) NHD/RAM Vehicle Base-GM 1500,2500,3500 Floor w/ Swivel		#RAM-VB-131A

	No-Holes pedestal base custom designed for use in the following trucks: Includes Base Pivot Adjustment. CHEVROLET 2500 C/K (2000-2006) CHEVROLET 3500 C/K (2000-2006) CHEVROLET SILVERADO (1999-2006) CHEVROLET SUBURBAN (2000-2006) CHEVROLET TAHOE (2000-2006) GMC SIERRA (2000-2006) GMC YUKON (2000-2006) Base attaches to vehicle using the passenger side floor seat bolts. Constructed from 8 gauge steel. Base provides 5 inch projection and 5.12 inch elevation for attaching a pole base.
	Price . . . .$ 115.97
	Item # 90-10-906-001B
.
(4) NHD/RAM Vehicle Base-GM 1500,2500,3500 Floor w/Step		#RAM-VB-131R4

	No-Holes pedestal base custom designed for use in the following trucks: Includes Base Step CHEVROLET 2500 C/K (2000-2006) CHEVROLET 3500 C/K (2000-2006) CHEVROLET SILVERADO (1999-2006) CHEVROLET SUBURBAN (2000-2006) CHEVROLET TAHOE (2000-2006) GMC SIERRA (2000-2006) GMC YUKON (2000-2006) Base attaches to vehicle using the passenger side floor seat bolts. Constructed from 8 gauge steel. Base provides 5 inch projection and 5.12 inch elevation for attaching a pole base.
	Price . . . .$ 86.96
	Item # 90-10-906-001C
.
(5) NHD/RAM Vehicle Base-GM 1500,2500,3500 Floor Center		#RAM-VB-103

	RAM Vehicle Laptop Desk Pedestal Assembly for the following vehicles: CHEVROLET 1500 C/K - 2WD (1994-1999) CHEVROLET 1500 C/K - 4WD-SELECTOR (ON DASH ONLY (1994-1999)) CHEVROLET 2500 C/K (1994-2000) CHEVROLET 3500 C/K (1994-2000) CHEVROLET BLAZER K-5 (1993-OLDER) CHEVROLET SILVERADO (1998-OLDER) CHEVROLET SUBURBAN (1994-1999) CHEVROLET TAHOE (1994-1999) GMC SIERRA (1994-1999) GMC YUKON (1994-1999) This base may not work with the factory installed center console or with Four Wheel Drive Levers that are on the floor. Drilling may be needed for vehicles with a bench seat. Note that the measurement "D" is 9 1/2". Check your vehicle dimensions prior to purchasing this base. Some models have factory installed accessories that prevent installation.
	Price . . . .$ 64.86
	Item # 90-10-906-001F
.
(6) NHD/RAM Vehicle Base-GM Tahoe 2007		#RAM-VB-159

	No-Holes pedestal base custom designed for use in the following trucks: Includes Base Pivot Adjustment. CHEVROLET SUBURBAN (2007) CHEVROLET TAHOE (2007) GMC YUKON (2007) Base attaches to vehicle using the passenger side floor seat bolts. Constructed from 8 gauge steel. Base provides 5 inch projection and 5.12 inch elevation for attaching a pole base.
	Price . . . .$ 126.59
	Item # 90-10-906-001K
.
(7) NHD/RAM Vehicle Base-GM Hummer H3 2006+		#RAM-VB-165

	RAM Vehicle Laptop Desk Pedestal Assembly for the following vehicles: GM Hummer H3 2006+. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 41.36
	Item # 90-10-906-001L
.
(8) NHD/RAM Vehicle Base-GM S-10 > 95		#RAM-VB-101

	No-Holes pedestal base custom designed for use in the Chevy S-10, Chevy S-10 Blazer, GMC Jimmy, GMC Sonoma 1995 and newer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel. Base provides 5 inch projection and 5.12 inch elevation for attaching a pole base
	Price . . . .$ 62.98
	Item # 90-10-906-002
.
(9) NHD/RAM Vehicle Base-GM Astro Van 2000+		#RAM-VB-136

	No-Holes pedestal base custom designed for use in the GM/Chevy Astro Vans. Base attaches to vehicle using the passenger side inside front and read seat bolts. Constructed from 8 gauge steel.
	Price . . . .$ 76.20
	Item # 90-10-906-002B
.
(10) NHD/RAM Vehicle Base-GM Savana/Xpres Van 2005 +		#RAM-VB-143

	No-Holes pedestal base custom designed for use in the GM Savana and Chevy Express Vans. Base attaches to vehicle using the passenger side inside front and read seat bolts. Constructed from 8 gauge steel.
	Price . . . .$ 87.42
	Item # 90-10-906-003A
.
(11) NHD/RAM Vehicle Base-GM Trlblz, Envoy		#RAM-VB-114

	No-Holes pedestal base custom designed for use in the GM Envoy and Chevy Trailblazer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 47.94
	Item # 90-10-906-004
.
(12) NHD/RAM Vehicle Base-GM Colorado/Canyon		#RAM-VB-116

	No-Holes pedestal base custom designed for use in the GM Colorado/Canyon without CrewCab (see RAM-VB-116A for CrewCab Installations). Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 79.90
	Item # 90-10-906-006
.
(13) NHD/RAM Vehicle Base-GM Colorado/Canyon CrewCab		#RAM-VB-116A

	No-Holes pedestal base custom designed for use in the GM Colorado/Canyon w/CrewCab. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 114.98
	Item # 90-10-906-006D
.
(14) NHD/RAM Vehicle Base-GM Malibu 2006+		#RAM-VB-157

	No-Holes pedestal base custom designed for use in the GM GM Malibu 2006+ . Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 56.53
	Item # 90-10-906-007A
.
(15) NHD/RAM Vehicle Base-GM Impala 00 to 05		#RAM-VB-111

	No-Holes pedestal base custom designed for use in the Chevy Impala 2000 to 2005. Base attaches to vehicle using the passenger side seat cushion frame bolts. Constructed from 8 gauge steel. Base provides 5 inch projection and 5.12 inch elevation for attaching a pole base.
	Price . . . .$ 56.53
	Item # 90-10-906-008
.
(16) NHD/RAM Vehicle Base-GM Impala Civilan 2006+		#RAM-VB-160

	No-Holes pedestal base custom designed for use in the Chevy Impala Civilan 2006 to 2009. Base attaches to vehicle using the passenger side seat floor bolts. Constructed from 8 gauge steel.
	Price . . . .$ 37.60
	Item # 90-10-906-008C
.
(17) NHD/RAM Vehicle Base-GM Impala Police 2006+		#RAM-VB-182

	No-Holes pedestal base custom designed for use in the Chevy Impala Police 2006 to 2009. Base attaches to vehicle using the passenger side seat floor bolts. Constructed from 8 gauge steel.
	Price . . . .$ 169.09
	Item # 90-10-906-008E
.
(18) NHD/RAM Vehicle Base-Jeep Liberty 2006 +		#RAM-VB-141

	No-Holes pedestal base custom designed for use in the 2006 Jeep Liberty. Base attaches to vehicle using the passenger side seat bolts. Constructed from 8 gauge steel.
	Price . . . .$ 33.84
	Item # 90-10-906-010A
.
(19) NHD/RAM Vehicle Base-JEEP SE, CLASSIC, SPORT, LTD		#RAM-VB-118

	No-Holes pedestal base custom designed for use in the: JEEP SE, CLASSIC, SPORT, LTD (1998-2001) Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel
	Price . . . .$ 65.92
	Item # 90-10-906-010B
.
(20) NHD/RAM Vehicle Base-Jeep Grand Cherokee 2005 +		#RAM-VB-142

	No-Holes pedestal base custom designed for use in the Jeep Grand Cherokee 2005 +. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel
	Price . . . .$ 56.40
	Item # 90-10-906-010C
.
(21) NHD/RAM Vehicle Base-Jeep Wrangler		#RAM-VB-158

	RAM Vehicle Laptop Pedestal Assembly for the following vehicles: Jeep Wrangler 1997-2006
	Price . . . .$ 35.72
	Item # 90-10-906-010F
.
(22) NHD/RAM Vehicle Base-Jeep Wrangler, Sahara, Rubicon		#RAM-VB-170

	RAM Vehicle Laptop Pedestal Assembly for the following vehicles: JEEP WRANGLER 2 DR (2007-NEWER) JEEP WRANGLER 4 DR (2007-NEWER) JEEP WRANGLER SAHARA 2 DR (2007-NEWER) JEEP WRANGLER SAHARA 4 DR (2007-NEWER) JEEP WRANGLER RUBICON 2 DR (2007-NEWER) JEEP WRANGLER RUBICON 4 DR (2007-NEWER)
	Price . . . .$ 20.68
	Item # 90-10-906-010G
.
(23) NHD/RAM Vehicle Base-Ddge 1500,2500,3500 (Passenger)		#RAM-VB-104

	No-Holes pedestal base custom designed for use in the Dodge RAM 1500,2500,3500 and newer. This No-Drill System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rail bolts. (Base is centered over transmission tunnel) Constructed from 8 gauge steel.
	Price . . . .$ 97.88
	Item # 90-10-906-020
.
(24) NHD/RAM Vehicle Base-Ddge 1500,2500,3500 (Center)		#RAM-VB-127

	No-Holes pedestal base custom designed for use in the Dodge RAM 1500,2500,3500 and newer. This No-Drill System installs quickly and easily into the specified vehicles using the existing hardware of the passenger and driver side inner seat rail bolts. (Base is centered over transmission tunnel) Constructed from 8 gauge steel.
	Price . . . .$ 80.84
	Item # 90-10-906-020C
.
(25) NHD/RAM Vehicle Base-Ddge 4500,5500 (Passenger)		#RAM-VB-178

	No-Holes pedestal base custom designed for use in the Dodge 4500,5500 (2008+) . This No-Drill System installs quickly and easily into the specified vehicles using the existing hardware of the passenger side seat rail bolts. (Base is centered over transmission tunnel) Constructed from 8 gauge steel.
	Price . . . .$ 40.42
	Item # 90-10-906-020E
.
(26) NHD/RAM Vehicle Base-Ddge Caravan 2005-2007		#RAM-VB-146

	No-Holes pedestal base custom designed for use in the Dodge Caravan 2005-2007. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 105.49
	Item # 90-10-906-021
.
(27) NHD/RAM Vehicle Base-Ddge Caravan 1996-2004		#RAM-VB-121

	No-Holes pedestal base custom designed for use in the Dodge Caravan 1996-2004. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 76.95
	Item # 90-10-906-021B
.
(28) NHD/RAM Vehicle Base-Ddge Caravan/Town and Country 2008		#RAM-VB-175

	No-Holes pedestal base custom designed for use in the Dodge Caravan/Town and Country 2008. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 51.16
	Item # 90-10-906-021C
.
(29) NHD/RAM Vehicle Base-Ddge Sprinter 2003-2008		#RAM-VB-106R4

	No-Holes pedestal base custom designed for use in the Dodge Sprinter Van (2003-2008). Base attaches to vehicle using the passenger side seat floor bolts. Constructed from 8 gauge steel. Base provides 5 inch projection and 5.12 inch elevation for attaching a pole base
	Price . . . .$ 83.66
	Item # 90-10-906-022A
.
(30) NHD/RAM Vehicle Base-Ddge Dakota,Durango		#RAM-VB-105

	No-Holes pedestal base custom designed for use in the Dodge Durango 1997 to 2003 and Dakota 1997 to 2004 . Base attaches to vehicle using the passenger side seat cushion frame bolts. Constructed from 8 gauge steel. Base provides 5 inch projection and 5.12 inch elevation for attaching a pole base.
	Price . . . .$ 23.50
	Item # 90-10-906-023
.
(31) NHD/RAM Vehicle Base-Ddge Dakota 05 and Newer		#RAM-VB-130

	No-Holes pedestal base custom designed for use in the Dodge Dakota 05 and Newer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 48.68
	Item # 90-10-906-024
.
(32) NHD/RAM Vehicle Base-Ddge Magnum/Charger 05 and Newer		#RAM-VB-129

	No-Holes pedestal base custom designed for use in the Dodge Magnum/Charger 05 and Newer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 38.28
	Item # 90-10-906-026
.
(33) NHD/RAM Vehicle Base-Ddge Magnum/Charger Police Version		#RAM-VB-145P

	No-Holes pedestal base custom designed for use in the Dodge Magnum/Charger Police Version. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 38.63
	Item # 90-10-906-026B
.
(34) NHD/RAM Vehicle Base-Ddge Magnum/Charger Police Version		#RAM-VB-D-145-1

	Vehicle Base-Fits slotted equipment console for the Dodge Magnum/Charger Police Vehicle
	Price . . . .$ 33.84
	Item # 90-10-906-026R
.
(35) NHD/RAM Vehicle Base-Chryr 300 2005 +		#RAM-VB-145

	No-Holes pedestal base custom designed for use in the Chrysler 300 2005 +. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 71.04
	Item # 90-10-906-028A
.
(36) NHD/RAM Vehicle Base-Chryr PT Cruiser (2001-2005)		#RAM-VB-162

	No-Holes pedestal base custom designed for use in the Chrysler PT Cruiser 2001 to 2005 +. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 71.44
	Item # 90-10-906-028B
.
(37) NHD/RAM Vehicle Base-Ddge Stratus 2005+		#RAM-VB-147

	No-Holes pedestal base custom designed for use in the Dodge Stratus 2005++ Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel
	Price . . . .$ 38.54
	Item # 90-10-906-028C
.
(38) NHD/RAM Vehicle Base-Ddge Avenger, Caliber 2007+		#RAM-VB-177

	No-Holes pedestal base custom designed for use in the Dodge Avenger, Caliber 2007 and newer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 59.22
	Item # 90-10-906-028D
.
(39) NHD/RAM Vehicle Base-Ford Crown Vic		#RAM-VB-106

	No-Holes pedestal base custom designed for use in the Ford Crown Vic 91 and newer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 49.82
	Item # 90-10-906-030
.
(40) NHD/RAM Vehicle Base-Ford Crown Vic (Center)		#RAM-VB-107

	No-Holes pedestal base custom designed for use in the Ford Crown Vic 91 and newer. Base attaches to vehicle using the passenger and driver side inner seat frame bolts. (base is centered over transmission tunnel) Constructed from 8 gauge steel.
	Price . . . .$ 69.12
	Item # 90-10-906-030C
.
(41) RAM No-DrillTM Vehicle Mounts		#RAM-VB-117

	Vehicles CHEVROLET CAMARO CAR (1993-NEWER) CHEVROLET CAPRICE CAR (1990-1995) FORD CROWN VICTORIA POLICE INTERCEPTOR CAR (1991-NEWER) LINCOLN TOWN CAR (2005-NEWER) Placement of Mount Passenger side on the floor, under seat Drilling Requirements No - uses existing seat bolts Seat Configuration Bucket/bench/60-40 split Dimensions A = 17.57", B = 5.5", C = 11" Hole Center = 6.38"
	Price . . . .$ 54.52
	Item # 90-10-906-030E
.
(42) NHD/RAM Vehicle Base-Ford 500/Freestyle		#RAM-VB-161

	No-Holes pedestal base designed for use in the: Ford 500 2006 and newer Ford Freestyle 2006 and newer Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 88.31
	Item # 90-10-906-032A
.
(43) NHD/RAM Vehicle Base-Ford Fusion		#RAM-VB-167

	No-Holes pedestal base designed for use in the: FORD FUSION (2006-NEWER) LINCOLN MKZ (2007-NEWER) MERCURY MILAN (2006-NEWER) Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 28.20
	Item # 90-10-906-032D
.
(44) NHD/RAM Vehicle Base-Ford Taurus		#RAM-VB-115

	No Drill base; Fits across transmission hump uses inner seat-bolts in the following vehicles: FORD TAURUS (1995-OLDER) FORD TAURUS (1997 GL) FORD TAURUS (1998-NEWER LX, SE, SIX PASSENGER MODEL)
	Price . . . .$ 33.84
	Item # 90-10-906-033
.
(45) NHD/RAM Vehicle Base-Ford Focus 2003 +		#RAM-VB-148

	No-Holes pedestal base custom designed for use in the Ford Focus 2003 + Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel
	Price . . . .$ 37.60
	Item # 90-10-906-033C
.
(46) NHD/RAM Vehicle Base-Ford Freestar		#RAM-VB-120

	No-Holes pedestal base custom designed for use in the Ford Freestar Van. Base attaches to vehicle using the passenger side left front & rear seat bolts. Center Console Must be Removed. Constructed from 8 gauge steel.
	Price . . . .$ 68.62
	Item # 90-10-906-036
.
(47) NHD/RAM Vehicle Base-Ford EconoLine		#RAM-VB-119

	No-Holes pedestal base custom designed for use in the Ford Freestar Van. Base attaches to vehicle using the DRIVER side RIGHT front & rear seat bolts. Constructed from 8 gauge steel.
	Price . . . .$ 84.87
	Item # 90-10-906-039
.
(48) NHD/RAM Vehicle Base-Ford Escape 2005+		#RAM-VB-152

	No-Holes pedestal base custom designed for use in the Ford Escape 2005+. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 68.34
	Item # 90-10-906-041A
.
(49) NHD/RAM Vehicle Base-Ford Edge 2007-2008		#RAM-VB-172

	No-Holes pedestal base custom designed for use in the Ford Edge 2007-2008. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 26.32
	Item # 90-10-906-041C
.
(50) NHD/RAM Vehicle Base-Ford Rngr, Expl 01		#RAM-VB-113

	No-Holes pedestal base custom designed for use in the Ford Explorer 93 to 01 and Ford Ranger 93 and newer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 87.42
	Item # 90-10-906-042
.
(51) NHD/RAM Vehicle Base-Ford Explorer 02 Newer		#RAM-VB-112

	No-Holes pedestal base designed for use in the Ford Explorer 2002 and newer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 32.90
	Item # 90-10-906-045
.
(52) NHD/RAM Vehicle Base-Ford Expedition all, F-150 97 to 03		#RAM-VB-110

	No-Holes pedestal base designed for use in the following vehicles: FORD EXPEDITION (1996-2003) FORD F-150 (1997-2003) FORD F-150 HERITAGE (2004) FORD F-250 LIGHT DUTY (1997-2004) Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 111.36
	Item # 90-10-906-048
.
(53) NHD/RAM Vehicle Base-Ford Expedition 2006+ (See Below)		#RAM-VB-166

	No-Holes pedestal base designed for use in the following vehicles: LINCOLN NAVIGATOR (2006-NEWER) FORD EXPEDITION (2006-NEWER) FORD EXPEDITION (BUCKET SEATS ONLY) (2004-2005) Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 96.22
	Item # 90-10-906-049
.
(54) NHD/RAM Vehicle Base-Ford F150 03 Newer		#RAM-VB-109

	No-Holes pedestal base designed for use in the Ford Expedition 1997 and newer, Ford F-150 1997-2003. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 96.57
	Item # 90-10-906-051
.
(55) NHD/RAM Vehicle Base-Ford Exc,F250,350		#RAM-VB-108

	No-Holes pedestal base custom designed for use in the Ford Excursion, F-250 and F-350 1999 and Newer. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel. Will Not Fit with Factory Center Console Installed.
	Price . . . .$ 78.91
	Item # 90-10-906-054
.
(56) NHD/RAM Vehicle Base-Scion xB 2005-2007		#RAM-VB-150

	No-Holes pedestal base custom designed for use in the Scion xB Years 2005-2007 Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 114.71
	Item # 90-10-906-059A
.
(57) NHD/RAM Vehicle Base-Scion xB 2008		#RAM-VB-173

	No-Holes pedestal base custom designed for use in the Scion xB Years 2008. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 42.30
	Item # 90-10-906-059C
.
(58) NHD/RAM Vehicle Base-Nissan Titan 2006 +		#RAM-VB-134

	No-Holes pedestal base custom designed for use in the 2006 Nissan Titan. Base attaches to vehicle using the passenger side seat bolts. Constructed from 8 gauge steel.
	Price . . . .$ 52.64
	Item # 90-10-906-060C
.
(59) NHD/RAM Vehicle Base-Nissan Path/Xterra/Frontier		#RAM-VB-154

	No-Holes pedestal base custom designed for use in the: Nissan Pathfinder (2005 + Newer) Nissan Xterra (2004 + Newer) Nissan Frontier (2004 + Newer) Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 39.48
	Item # 90-10-906-060E
.
(60) NHD/RAM Vehicle Base-Subaru Forester, Impreza, Legacy		#RAM-VB-169

	No-Holes pedestal base custom designed for use in the: HONDA ACCORD (2008) SUBARU FORESTER (2006-NEWER) SUBARU IMPREZA (2006-NEWER) SUBARU LEGACY (2006-NEWER) Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 109.10
	Item # 90-10-906-061B
.
(61) NHD/RAM Vehicle Base-Toyota Camry 2006 +		#RAM-VB-137

	No-Holes pedestal base custom designed for use in the 2006 Toyota Camry. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 72.38
	Item # 90-10-906-062A
.
(62) NHD/RAM Vehicle Base-Toyota Tacoma/4Runner 2006 +		#RAM-VB-138

	No-Holes pedestal base custom designed for use in the 2006 Toyota Toyota Tacoma/4Runner. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 85.00
	Item # 90-10-906-062E
.
(63) NHD/RAM Vehicle Base-Toyota FJ Cruiser 2006+		#RAM-VB-138ST1

	No-Holes pedestal base custom designed for use in the Toyota FJ Cruiser 2006+. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 93.40
	Item # 90-10-906-062F
.
(64) NHD/RAM Vehicle Base-Toyota Tundra 2000-2006		#RAM-VB-133

	No-Holes pedestal base custom designed for use in the 2000 to 2006 Toyota Tundra. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 47.94
	Item # 90-10-906-062G
.
(65) NHD/RAM Vehicle Base-Toyota Highlander 2005+		#RAM-VB-149

	No-Holes pedestal base custom designed for use in the 2005 + Highlander. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 40.42
	Item # 90-10-906-062H
.
(66) NHD/RAM Vehicle Base-Toyota Sienna 2005+		#RAM-VB-153

	No-Holes pedestal base custom designed for use in the Toyota Sienna 2005+. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 47.00
	Item # 90-10-906-062J
.
(67) NHD/RAM Vehicle Base-Toyota Tundra 2007+		#RAM-VB-180

	No-Holes pedestal base custom designed for use in the 2007 and UP Toyota Tundra. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 129.50
	Item # 90-10-906-062N
.
(68) NHD/RAM Vehicle Base-Toyota Prius 2007-2008		#RAM-VB-171

	No-Holes pedestal base custom designed for use in the 2007 and 2008 Toyota Prius. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 32.90
	Item # 90-10-906-062P
.
(69) NHD/RAM Vehicle Base-Toyota Yaris 2008-2009		#RAM-VB-179

	No-Holes pedestal base custom designed for use in the 2008 and 2009 Toyota Yaris. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 92.83
	Item # 90-10-906-062Q
.
(70) NHD/RAM Vehicle Base-Hyundai Sonata, Elantra, Azera & Kia Optima		#RAM-VB-156

	No-Holes pedestal base custom designed for use in the folowing vehicles: HYUNDAI AZERA (2006-NEWER) HYUNDAI ELANTRA (2005-NEWER) HYUNDAI SONATA (2005-NEWER) KIA OPTIMA (2005-NEWER) Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel
	Price . . . .$ 49.62
	Item # 90-10-906-064B
.
(71) NHD/RAM Vehicle Base-Kia Sorento 2005 +		#RAM-VB-144

	No-Holes pedestal base custom designed for use in the Kia Sorento 2005 +. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel
	Price . . . .$ 37.60
	Item # 90-10-906-064C
.
(72) NHD/RAM Vehicle Base-Honda Ridgeline		#RAM-VB-132

	No-Holes pedestal base custom designed for use in the Honda Ridgeline. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 52.64
	Item # 90-10-906-065
.
(73) NHD/RAM Vehicle Base-Honda Pilot 2005 +		#RAM-VB-163

	No-Holes pedestal base custom designed for use in the Honda Pilot. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 95.66
	Item # 90-10-906-065A
.
(74) NHD/RAM Vehicle Base-Honda Elemenet 2006		#RAM-VB-135MH1

	No-Holes pedestal base custom designed for use in the 2006+ Honda Element. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 61.10
	Item # 90-10-906-065B
.
(75) NHD/RAM Vehicle Base-Honda CR-V 2006 +		#RAM-VB-135

	No-Holes pedestal base custom designed for use in the 2006 Honda CR-V. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 48.88
	Item # 90-10-906-065C
.
(76) NHD/RAM Vehicle Base-Honda Civic 2006+		#RAM-VB-155

	No-Holes pedestal base custom designed for use in the 2006+ Honda Civic. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 45.12
	Item # 90-10-906-065D
.
(77) NHD/RAM Vehicle Base-Honda Accord 2006 +		#RAM-VB-139

	No-Holes pedestal base custom designed for use in the 2006 Honda Accord. Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 47.98
	Item # 90-10-906-065E
.
(78) NHD/RAM Vehicle Base-Volkswagen Jetta, Beetle 1998-2008		#RAM-VB-174

	No-Holes pedestal base custom designed for use in the Volkswagen Jetta, Beetle 1998-2008 Base attaches to vehicle using the passenger side seat frame bolts. Constructed from 8 gauge steel.
	Price . . . .$ 38.54
	Item # 90-10-906-066A
.
(79) NHD/RAM Vehicle Base-Freightliner, Intl, Kenworth, Peterbilt, Volvo		#RAM-VB-168

	No-Holes pedestal base custom designed for use with the following trucks: FREIGHTLINER TRUCKS INTERNATIONAL TRUCKS KENWORTH TRUCKS PETERBILT TRUCKS VOLVO TRUCKS Base attaches to seat frame using existing bolts. Constructed from 8 gauge steel.
	Price . . . .$ 89.31
	Item # 90-10-906-068
.
(80) NHD/RAM Vehicle Base-Semi w/National Seat		#RAM-VB-140

	No-Holes pedestal base custom designed for use with trucks using the National Seating Captain's Chair. Base attaches to seat frame using existing bolts. Constructed from 8 gauge steel.
	Price . . . .$ 57.34
	Item # 90-10-906-068A
.
(81) NHD/RAM Vehicle Base-Semi w/Contact Seat Inc. Chair		#RAM-VB-151

	No-Holes pedestal base custom designed for use with trucks using the Contact Seats Inc. Chair. Base attaches to seat frame using existing bolts. Constructed from 8 gauge steel.
	Price . . . .$ 65.80
	Item # 90-10-906-068C
.
(82) NHD/RAM Vehicle Base-Semi Sears Atlas 2005 +		#RAM-VB-164

	No-Holes pedestal base custom designed for use with trucks using the Sears Atlas 2005 +. Base attaches to seat frame using existing bolts. Constructed from 8 gauge steel.
	Price . . . .$ 42.30
	Item # 90-10-906-068E
.
(83) NHD/RAM Step Riser 4"		#RAM-VB-SB4

	Step Riser 4" for use with RAM\NHD vehicle bases
	Price . . . .$ 31.96
	Item # 90-10-906-070A
.
(84) NHD/RAM Step Riser 7"		#RAM-VB-SB7

	Step Riser 7" for use with RAM\NHD vehicle bases
	Price . . . .$ 38.54
	Item # 90-10-906-070B
.
(85) NHD/RAM VB Quick Disconnect Adapter		#RAM-VB-REM1

	NHD/RAM VB Quick Disconnect Adapter provides a method for quickly removing the upper portion of the VB mounting assembly from the fixed base. Useful for providing extra space or mount portability.
	Price . . . .$ 44.28
	Item # 90-10-906-071A
.
(86) NHD/RAM VB Pole Swivel Adapter		#RAM-VB-ADJ1

	NHD/RAM VB Quick Swivel Adapter provides a method for precise upper pedestal position in relation to the fixed base. Useful for adapting mount installations to unique meet interior requirements. Projection range is 0" to 5.25"
	Price . . . .$ 53.99
	Item # 90-10-906-071E
.
(87) NHD/RAM Tele-Pole 5"		#RAM-VP-TBF5U

	5" Tall Pole for use with the RAM/NHD Bases and Steps.
	Price . . . .$ 14.53
	Item # 90-10-906-072A
.
(88) NHD/RAM Tele-Pole 7"		#RAM-VP-TBF7U

	7" Tall Pole for use with the RAM/NHD Bases and Steps.
	Price . . . .$ 16.92
	Item # 90-10-906-072B
.
(89) NHD/RAM Tele-Pole 9"		#RAM-VP-TBF9U

	9" Tall Pole for use with the RAM/NHD Bases and Steps.
	Price . . . .$ 15.98
	Item # 90-10-906-072C
.
(90) NHD/RAM Tele-Pole-Insert 4"		#RAM-VP-TTM4U

	4" Telescoping Insert for use with RAM/NHD poles. Hardware Included.
	Price . . . .$ 22.56
	Item # 90-10-906-074A
.
(91) NHD/RAM Tele-Pole-Insert 8"		#RAM-VP-TTM8U

	8" Telescoping Insert for use with RAM/NHD poles. Hardware Included.
	Price . . . .$ 24.44
	Item # 90-10-906-074B
.
(92) NHD/RAM Tele-Pole-Insert 12"		#RAM-VP-TTM12U

	12" Telescoping Insert for use with RAM/NHD poles. Hardware Included.
	Price . . . .$ 38.28
	Item # 90-10-906-074C
.
(93) NHD/RAM Tele-Pole-Insert 4" w/Flange		#RAM-VP-TTMF4U

	NHD/RAM Tele-Pole-Insert 4" w/Flange attachment point.
	Price . . . .$ 31.96
	Item # 90-10-906-075A
.
(94) NHD/RAM Tele-Pole-Insert 8" w/Flange		#RAM-VP-TTMF8U

	NHD/RAM Tele-Pole-Insert 8" w/Flange attachment point.
	Price . . . .$ 32.28
	Item # 90-10-906-075B
.
(95) NHD/RAM Tele-Pole-Insert 12" w/Flange		#RAM-VP-TTMF12U

	NHD/RAM Tele-Pole-Insert 12" w/Flange attachment point.
	Price . . . .$ 39.28
	Item # 90-10-906-075C
.
(96) COLUMN-PEDESTAL 8X8 Heavy Duty Cantilevered (Horizontal)		#RAM-VBD-122

	COLUMN-PEDESTAL 8X8 Heavy Duty
	Price . . . .$ 51.46
	Item # 90-10-906-162A
.
(97) COLUMN-PEDESTAL 8X8 Medium Duty (Horizontal)		#RAM-VBD-125

	COLUMN-PEDESTAL 8X8 Meduim Duty
	Price . . . .$ 47.94
	Item # 90-10-906-162C
.
(98) COLUMN-PEDESTAL 5X12 Medium Duty (Horizontal) w/Step		#RAM-VBD-101

	COLUMN-PEDESTAL 5X12 Medium Duty (Horizontal) w/ 5" Step Angle step matches pitch of transmission tunnel in the following vehicles: (Requires Drilling) CHEVROLET SILVERADO (1999-2006) CHEVROLET SUBURBAN (2000-2006) CHEVROLET TAHOE (2000-2006) DODGE DURANGO (2004-NEWER) FORD EXCURSION (2000-2005) FORD F-150 (1997-NEWER) FORD F-250 LIGHT DUTY (1997-2004) FORD F-250, F-350, F-450, F-550, F-750 SUPER DUTY TRUCKS (1999-NEWER) FORD RANGER (1993-NEWER) GMC YUKON (2000-2006)
	Price . . . .$ 58.28
	Item # 90-10-906-162D
.
(99) COLUMN-PEDESTAL Tran. Tunnel Medium Duty (45 Degree)		#RAM-VBD-126

	COLUMN-PEDESTAL Step Medium Duty (45 Degree) Angle base matches pitch of transmission tunnel in the following vehicles: (Requires Drilling) FORD BRONCO (1996-OLDER) FORD EXPEDITION (1996-OLDER) FORD F-150 (1996-OLDER) FORD F-250 (1996-OLDER)
	Price . . . .$ 27.26
	Item # 90-10-906-162E
.
(100) COLUMN-PEDESTAL 8X8 Medium Duty (Vertical)		#RAM-VBD-128

	COLUMN-PEDESTAL 8X8 Medium Duty (Vertical)
	Price . . . .$ 37.60
	Item # 90-10-906-162F
.
(101) COLUMN-PEDESTAL 3X8 Medium Duty (Vertical)		#RAM-VB-181

	Vehicles: Universal, all vehicles that contain flat vertical surfaces including dog houses, engine covers and RAM console boxes. Placement of Mount: Flat, vertical surface. Drilling Requirements: Yes Seat Configuration: All Pole: Lower tube welded to base Finish: Black Powder Coating Weight: 2.2 lbs. Base Dimensions: A = 3, B = 7.5, C = 2.029, Base Hole Centers = 3.34 Back Plate Dimensions: A = 3.25, B = 1.5, Back Plate Hole Centers = 2 Height Adjustability: Height can be adjusted from 7.75 to 12.7.5, depending on the upper tube size. Note: RAM-VBD-181 can be mounted on both sides of RAM 9", 13", 17" and 21" Console Boxes.
	Price . . . .$ 29.71
	Item # 90-10-906-162H